Won't start

Asked by Ladygirl37 Jan 20, 2019 at 03:20 AM about the 2003 Pontiac Montana Value

Question type: Maintenance & Repair

My van wont start the lights and locks work but it
wont say anything but if u try a few time it will try
to turn but nothing but clicking

2 Answers

22,650

Start with battery load test. A battery with 11.5 volts many times will not start a vehicle. Especially anything larger than a 2.0 liter. 12.6 volts is a fully charged battery but doesn’t mean it is a good battery. Load test for good or bad status

45

Check your battery cable connections, do they have a bunch of salty looking build up around the posts/connections? Are the connections loose? Both? If connections are corroded they should be taken off and cleaned thoroughly with wire brush/sandpaper then reattached. Make sure they are properly tightened, but don't over do it those battery connections are held in place by the battery housing itself. If your not confident to do this and no one can help you I'll share with you an old temporary remedy to this, but still check for loose connections okay? Take a glass of water and put a tablespoon of Baking soda in it and slowly pour some on each terminal let the mixture do the work repeat if necessary, good luck Ladygirl.

1 people found this helpful.

Your Answer:

CarGurus Experts

  • #1
    Countrygal77
    Reputation
    2,930
  • #2
    Robert Reed
    Reputation
    2,030
  • #3
    DaveG
    Reputation
    1,090
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.