Jeep Cherokee Questions Maintenance & Repair
How Do I Reset An Alarm System
my daughter had my 1994 jeep chrokee, the alarm went off she wasn't sure how to shut it off so she unhooked the battery. now it starts but shuts right off. what do i need to do?
Changing Spark Plugs
i cant find my plugs or wires for my spark plugs
Where Do You Find Replacement Parts ?
where do you find interior replacement parts for this model
Where Is The Fuel Filter On A 4.0 HO?
How do I change it, what tools , everything
Repair Help
I picked up an amazing deal in the form of a 1977 FS Cherokee that was not running. The seller had attempted to fix it himself and somehow grounded the whole electrical system out by bolting the main ...
I Need A Good Mechanic To Work On My 1991 Jeep Cherokee
I need a new altinater and extra work done and don't know where to go
1999 Jeep Cherokee Runs Rough, Stalls No Check Engine Light Is On. It Has F...
no check engine light is comming on but hesitates and sometimes stalls plugs,cap.rotor and wires are in very good condition,has good fuel pressure. the only code stored was p0132 upstream o2 sensor h...
1998 Jeep Grand Cherokee Stalls When It Feels Like It .just Like Turning Th...
It has 118000 miles. 4 litre engine HELP!!
Can I Disconnect The Wires Going Into The Dist & Start The 4.0L 6cyl Engine...
my 4 cyl jeep does not have any wires going to the coil in the distributor--my 6 cyl does---can i start the 6 cyl 4.0L engine with the plug to those wires unhooked ?? those wires are for the cam pos...
Where Is The Relay For 1991 Cherokee Windows
where is the window relay for a jeep cherokee, dont have a owner book, didnt see it under the hod or under the dash, have no power to motor, but all motors work, (hotwired)
Diagnosis Of Strange Behavior
OK, check it out- I'm having problems with my jeep running a little too hot... sometimes. When I try to accelerate for passing or take off the engine seems to hesitate or get "caught up". If I let off...
Ignition Switch Too Long For Rod?
the ignition switch for the 77 is too long it binds up so tight you cant turn the key. I have used both tilt and notilt switchs and still cant fix it. What am i doing wrong?
If The Actuator Rod Is Binding The Lock Cylinder Up Because Of The Ignition...
the lock cylinder was seiezed on the column so i replaced it and now the rod that goes into the ignition switch when installed is so tight you cant turn the key. I've put 3 different switches on and t...
Where Is The Relay For The Turn Signals
The signals don't work, I have replaced the flasher fuse, and all of the bulbs. I was told it may be the realy but donot have a schematic saying which one it is? Thank You Gary A.Hudak
Wet Floor Passenger Side
The passenger flooor is getting wet in the front. can't seem to locate the cause. there is no odor of anti freeze or fluid coming from the matt, but I do seem to loose a bit of antifreeze from the ...
Brake Light Goes Out When I Have My Headlights On. 1999 Jeep Grand Cherokee...
My driver side brake light does not work when I have my headlights on. It works fine when they are off. I replaced the bulb. That didn't help. What could be causing this? Liz in CT
77 Cherokee.... Lift Options And More Questions...
...... I see you know something about the 77 Cherokee... so I thought I'd ask a few questions if you do not mind. I am a IH Scout guy.... and generally know everything about them.... but not too proud...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.