on my 1976 datsun 280z after driving it and shutting it off for more than 10 min. it acts like it is flooded and backfires for about a minute then runs normal,

on my 1976 datsun 280z after driving it and shutting it off for more than 10 min. it acts like it is flooded and backfires for about a minute then runs normal, 1 Answer

here is a tough one boys, I just installed a new engine into my 1978 Datsun 280Z, and I can't get it to start. It has fuel, spark, & compression. I have checked the valves & they R OK, timing is right 8 Answers

I have replaced the flow meter, the thermo time sending unit & the main Brain computer box and the ingnition switch and still don't even get a backfire. Any Help out there? I've been doing this for 50...

What would cause my 1976 Datsun 280Z to just quit and then today started right up? 2 Answers

My wife was driving back from the store and it just quit. It would turn over but acted like it wasn't getting any gas. It has new injectors, fuel filter and fuel pump. I went back to work on it t...

Car is blowing out a lot of smoke and stalling out. Why is the car doing this? 5 Answers

I have a 1978 Datsun 280Z. The car was running fine and perfect and one day it stalled on me and would not start back up. I changed the fuel pump and the fuel filter. The car now starts, but is blo...

I have n47 head, when I removed it it had metal gasket and a head gasket do I have to put both plate and gasket on when I reassemble it. 1 Answer

Its a 78z but a 79 motor, N47 head, I need to know if the metal spacer on the engine head needs to be replaced?