Ignition cylinder

Asked by GuruBGTFX Jan 28, 2019 at 11:40 PM about the 1973 Ford F-100

Question type: Maintenance & Repair

I used a screwdriver on my broken ignition cylinder
switch and it sparked now truck lights dont work
and truck wont start I am mostly worried about
the head lights and back lights etc

F_O_R answered 5 years ago

New ignition switch.

2 people found this helpful.

Mark helpful

Your Answer:

Ignition cylinder 1 Answer

I used a screwdriver on my broken ignition cylinder switch and it sparked now truck lights dont work and truck wont start I am mostly worried about the head lights and back lights etc

1973 Ford F-100

-

Maintenance & Repair
I would like to know if there is someone out there that can help me with engine compartment decals and any other for a 1961 fi00 pickup with a 6 cylinder unibody.Thanks (402) 718 7022,Ron 2 Answers

I need to find someone that can help me with engine compartment and any other decal (Placement) on a 1961 Ford F100 pickup with a 6 cylinder and unibody.Thanks Ron (402) 718 7022.

1961 Ford F-100

-

Maintenance & Repair
I have a 1975 FordF100 300 6cyl 3spd . Will turn over. Getting gas and good spark. Used to run. At 45-50 mph the engine would bog down, I take it out of gear and rev fine under load bog down. Replaced plugs,wires,distributor,coil,ignition module and carburetor. 1 Answer

Will turn over. Getting gas and good spark. Used to run. At 45-50 mph the engine would bog down, I take it out of gear and rev fine under load bog down. Replaced plugs,wires,distributor,coil,i... mo...

1975 Ford F-100

-

Maintenance & Repair
I have a 1974 ford f100 recently changed starter alternator cylinoid and voltage regulator.. the truck was running fine fine before changing these out n now have no power to the ignition. nothing happ 7 Answers

U turn key nothing happens sdont no what to do or how to fix it

1974 Ford F-100

-

Maintenance & Repair
I have a 302cu engine in my truck I am the 2nd owner it has over 100,000mls. I replaced everything under the hood and replaced the points with pentritox ignition. One day it would not start it flooded 5 Answers

I replaced the plugs replaced both gas filters go to start it and it floods again. So I decided to rebuild the 2bbl carburetor. The engine takes along time to start once running cold or warm if I l...

1972 Ford F-100

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.