I have a Chrysler 300m we just put a new transmission in, now it won't crank over or start but it will start if you start it from the relay. Do you know what will cause that.

I have a Chrysler 300m we just put a new transmission in, now it won't crank over or start but it will start if you start it from the relay. Do you know what will cause that. 3 Answers

All power is lost when I get in the car to turn it on. I opened the door and all the lights come on, you know the dash and interior lights but it will not start. 1 Answer

I my car has done this before lately and it started right up. What could be causing this? I replaced the Battery, The battery post cables both positive and negative. I thought it was the CAM shaft o...

2000 Chrysler 300M sounds like it wants to turn over but won't. What could it be? 5 Answers

While I was driving on the interstate, it shook twice very quickly as the check engine light flashed on and off and then the engine lost all power. I had to coast to the shoulder. No leaks of fluid. ...

the fuse relY keeps blowing for my 2000 chrysler 300m i put new fuses in it but nomatter what i do they keep blowing as soon as i put the fuse in> i dont even have to push any buttons 3 Answers

fuse relay under hood on my chrysler 300m keeps blowing. i replace it and as soon as the fuse touches the fuse relay it blows. it worked just fine a few days ago and then nothing

Chrysler 300M won't start 3 Answers

200 chrysler 300m popped codes for in and out trans speed sensors as well as cam position sensor. Was advised by all data to replace the crank position sensor and coolant temp sensor at the same t...