My 1989 Chevy 4 wheel drive 1500 stalls out when I put it in gear. Also after it has been running for awhile. Any ideas?

My 1989 Chevy 4 wheel drive 1500 stalls out when I put it in gear. Also after it has been running for awhile. Any ideas? 1 Answer

I have 94 chevy c1500 w/t and when put in gear and go to take off it acts like some the is holding it back it had been sitting for awhile and I replace the calibers both front ones 4 Answers

I have replaced both front calibers cause they were ceased and also have backed the brakes shoes up a little to see if the shoes was the problem and also checked the trans fluids also when I let o...

My 1995 Chevy truck slowly stalls out when I am stopped in gear 2 Answers

My 95 Chevy four-wheel-drive truck slowly drops in RPMs and stalls out when I am stopped in gear. I have replaced the injection and both sensors, when the truck first starts it idles high. The engi...

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...

my chevy 1998 k1500 grinds while in 4wheel drive when i put a strain on it 1 Answer

when my truck locks in to fwd its fine untill i put a minimal strain on it then i hear a grinding noise and it seems like it comes out 4wd.