has a binding noise when a turn, put in new cv, and bearings shimmys also, clears up a bit when i put it in 4wheel.

has a binding noise when a turn, put in new cv, and bearings shimmys also, clears up a bit when i put it in 4wheel. 1 Answer

I recently got my 87 Subaru brat and it won't start. If you turn the key nothing happens no lights, no gauges, no click, it won't try to turn over. It has a new battery and iv checked the connections. 2 Answers

Iv checked all the fuses. And has a new ignition switch

I have 86 brat, runs great until you speed up to 50 and over then chugs, and quits, sometimes starts right up sometimes no 4 Answers

this car sat for about 4 years not being started, it was always inside. I rebuilt the carburetor on it cleaned it all up prior to rebuild, chugs at high speed and finally quits, sometimes it will sta...

does anyone know where I can buy a Thermo Vacume Valve for an 86 subaru brat 1 Answer

broke the bottom stem off my thermo valve and need to replace the valve or modify it so it will work, any ideas?

Why is my brat idling fine but when trying to go it cuts out snd I can't go 2 Answers

Its a 84 yr model brat and just changed the fuel line and carburetor as well what else could be the problem