how to set the time on the radio
7 Answers
Hello I would highly advise purchasing a manual. These are not expensive with the help of sites such as ebay. Here is a link to get you started: http://search.ebay.com/search/search.dll?sofocus=unknown&sbrftog=1&from=R10&submitsearch=Search&satitle=1992+caravan+manual&sacat=-1%26catref%3DC6&sargn=-1%26saslc%3D2&sadis=200&fpos=02129&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1%26fsoo%3D1&coaction=compare&copagenum=1&coentrypage=search Best of luck! CarGrrl
try using a ball point pen on the clock hour/minutes lights. it worked on a replacement radio for my 1990 Dodge van.
My 1990 Dodge Caravan is equipped with a Crysler Infinity casette radio. It does NOT have ANY tiny holes, nor small h & m (hour and minute) buttons, whatsoever. Yes, I DO need an owner's manual for this.
PROBLEM SOLVED!!! 1- Put the key in the ignition, and turn it just so the radio comes on (you don't have to start the car). 2- Press the Set & Select buttons at the same time (they're on the bottom right side of the radio panel). Then, the hour should be ready to set. 3- Use the Seek button, and arrow up or down, to the correct hour. 4- Press the select button, and it should then go to the minutes. 5- Use the Seek button to arrow up or down to the correct minute. 6- Press the Set button to finalize the new time settings. To check if it set correctly, you can press P1 (will go to the radio channel on that setting) and then turn the radio off, and it'll show the time. ;-)
I have a dodge 2006 dodge caravan on mine just needed to use a pen push the bottoms on it they say m for minutes or h for hour push and hold
Guru94TJTW answered 4 years ago
I have a 2006 Chrysler caravan anf is trying to set the clock. I do not have a select button. Is it another name for it?
The pen pushing in the H & M button below EJT TAPR worked great and was so easy!