car stuck in park
7 Answers
check the brake interlock switch, its down by the brake pedal arm. If its bad, replace it, it wont let the shifter interlock open and you cant move the shifter.
wolverinelbperlb answered 11 years ago
There is a harness plug under the master cylinder. This harness controls the brake safety switch. It will get soaked with fluid then quit working. Some wire dry spray and harness cleaning will make it work then change the fuse. It will not be a permanent fix as it gets wet fast. There is a recall on these harnesses. The recall was for fire starting with this issue. The dealer will fix the problem for free. Their fix moves the sensor and looks like they just rig something to make it work, but it does and it was free.
Y is my 2008 ford crown victoria is stuck in park
wolverinelbperlb answered 7 years ago
I wrote a possible answer for this issue just above. Sometimes it is because there is to much pressure on the fly wheel to pull the shifter, parked on a hill will do it like mentioned earlier. Otherwise we would need more information from you, if those will not fix the issue.
Robinmeister answered 7 years ago
Car stuck in park, not on a hill or incline, moved the steering wheel all directions, still stuck. Can anyone help?
I have a 2007 CV the battery was dead so I replaced it and the car was able to crank again but now I'm stuck in Park. I'm on a flat driveway. Brake lights are not coming on anymore either. Please HELP!!
Replaced the master cylinder sensor and cleaned and the replaced break switch, still not able to get into drive. any other suggestions? Dave 1997 Crown Vic - Hoschton GA