I have a 2010 chrysler sebring that the heat is not working correctly so i want to disconnect the heater hoses and blow the heater core but not sure how to do it on this newr car it is not set up like

Asked by Cindy Feb 04, 2015 at 08:44 PM about the 2010 Chrysler Sebring

Question type: Maintenance & Repair

Not exactly sure if this will fix my problem, the heater blows hotter on the drivers side and
gets cooler as you go to the passenger side, it knocks the chill out of the air but doesnt
heat the car interior up to keep you warm

migration_tommcmanis... answered 9 years ago

Reprogram bcm if the battery dies it forgets. So one side works halfass the other cooks you outta the car.

3 people found this helpful.

Mark helpful

migration_tommcmanis... answered 9 years ago

Or not at all

Mark helpful

Cindy answered 9 years ago

what do you have to do to reprogram the bcm

8 people found this helpful.

Mark helpful

Your Answer:

I have a 2010 chrysler sebring that the heat is not working correctly so i want to disconnect the heater hoses and blow the heater core but not sure how to do it on this newr car it is not set up like 3 Answers

Not exactly sure if this will fix my problem, the heater blows hotter on the drivers side and gets cooler as you go to the passenger side, it knocks the chill out of the air but doesnt heat the car ...

2010 Chrysler Sebring

-

Maintenance & Repair
My 2000 Sebring heater only runs on high and doesn't put out any heat. Also it will only blow out the middle vents, not defrost or side vents. What should I do and please tell me like I'm a dummy 1 Answer

My 2000 Sebring heater only runs on high and doesn't put out any heat. Also it will only blow out the middle vents, not defrost or side vents. What should I do and please tell me like I'm a dummy

2000 Chrysler Sebring

-

Maintenance & Repair
I have a 2001 Chrysler Sebring, 2.7L. It recently overheated, n I had to add coolant, as it was empty. Yesterday, it overheated, but instead of the temperature gauge going up, it dropped all the way DOWN, past the C...the car has no heat, and overheats immediately when the car is warm. Does any one know what could b wrong??? 90 Answers

2001 Chrysler Sebring, 2.7L, no heat, overheating, temp. gauge dropped all the way DOWN when car overheated, instead of going up, and now doesn't work at all- still stuck on C.....

2001 Chrysler Sebring LX Sedan FWD

-

Maintenance & Repair
When I start up my 2010 Sebring, the clock will not come on till I hit the clock button. Is there a way to have clock come on after ignition? 2 Answers

When I start up my 2010 Sebring , the clock will not come on till I hit the clock button. Is there a way to have clock come on after ignition?

2010 Chrysler Sebring Touring Convertible FWD

-

Maintenance & Repair
My can shaft sensor is bad on my 2001 Chrysler Sebring that what came up on the code. Will this cause my car not to start. 2 Answers

Check engine light comes on took it to be scan and that's what the code came up with battery is good starter is good when I start the car the the fuse blows that says start/fuel which is a 20amp fus...

2001 Chrysler Sebring LXi Sedan FWD

-

Maintenance & Repair

Looking for a Used Sebring in your area?

CarGurus has 33 nationwide Sebring listings starting at $4,531.

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I have a 2010 chrysler sebring that the heat is not working correctly so i want to disconnect the heater hoses and blow the heater core but not sure how to do it on this newr car it is not set up like

3 Answers

Your Answer:

Looking for a Used Sebring in your area?

Shortcuts

Search Chrysler Sebring Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

I have a 2010 chrysler sebring that the heat is not working correctly so i want to disconnect the heater hoses and blow the heater core but not sure how to do it on this newr car it is not set up like

3 Answers

Your Answer:

Related Questions