WHITE SMOKE FROM THE EXHAUST
Hi after doing the motor over 3 times in a month theres still white smoke, ive change heads, seals and gaskets and v/seals etc
whats wrong with it still
did you change the block. is your vehicle a 6 cyl. some Toyotas have problems with the intake manifold cracks and 0n v6 blocks also.
hi there white smoke all the time, its so bad I cant see at the back
its a 4 cyl block
if I remove the head, then theres oil on top of the pistons heads, but I changed the rings as well
the white smoke means you are burning oil- so what is allowing oil into the combustion chamber? did you put the rings in right? etc. etc. on & on
yes sir three times lol
I don't know wat to do now
GM I took it to the engineer who cut the block from 20 to 30 and now its on 40"
I think its the chrome one and should I take it to another engineer to double check,
Hi there, just make sure when you insert the rings that its the rite side up n make sure that you dont crack the rings with the H-tool. Thirdly - donot let the ring gaps be alined. Also what you can do is do a micro check on your rings, its sometimes factory faults aswell. There can also be a play in the cylinder between the piston and sleeve, it also sound like a avol pod. Mark.
Morning i also have that problem of smoke but the spoke just pop out sometimes not and this upnormal sound when i accelerate normaly when i am driving 120
my car is toyota tazz
Hi my toyota conquest 1.6 16v carberator is heavy on fuel . What should i do?
Oil went up to the caparator? It's overheated? Now it doesn't start ? Exhaust is oily ?
