i have an '84 ford bronco 2 and it won't start
5 Answers
not sure need some test or some answers if you turn it on does it crank and if it does does it sound like anythings working right or is it cranking slow or any thing like that
try replaceing the black control box(cant think of part name)remove dist cap,rotor,u will see it,2 littlebolts,5.5mm,replace that and new rotor button,should crank.it sends spark to ign coil.
It makes no sound at all it does nothing but the brake light and seatbelt light come on when I turn the key but that's it
sounds like a blown fuseable link going to starter,or bad starter selynoid located on fender where battery cables hook to,replace that,dont cross wires,also follow wires going to starter you will see the fusablelink,the wire runs into it is about a inch long and round,it blowes 2 ways eather wire is burnt and is hanging out if not pull on it a little if it stretches (the wire),it is blown.u can geta new one at any parts store cut old one off put new one hook wires with the plastic wire connectors tape up good,then u could just have a bad starter.
PaulWall89 answered 9 years ago
I got a 84 bronco ll 2.8 4x4 4 speed I replace the thing on the finde going to the started but wen u turn the key over it don't do nothing besides the brake light come on n another light but it won't even roll off I need help