my 2002 mazda 626 is experiencing some overheating problems and the drivers side fan is not coming on.

Asked by Kailynbryson07 May 19, 2013 at 04:21 PM about the 2002 Mazda 626

Question type: Maintenance & Repair

my 2002 Mazda 626 v6 engine is overheating while idiling and when im in alot of bumper to bumper traffic. when i start driving the needle moves from the H and gors back to normal. my husband says that the driver side fan isnt working. he did the test where you check the fans and they both didnt work.

48,955

kbro answered 11 years ago

unplug the fans jump power and ground to them. If they run you will know the fans are good and it is a control problem.

2 people found this helpful.

Mark helpful

Your Answer:

my 2002 mazda 626 is experiencing some overheating problems and the drivers side fan is not coming on. 1 Answer

my 2002 Mazda 626 v6 engine is overheating while idiling and when im in alot of bumper to bumper traffic. when i start driving the needle moves from the H and gors back to normal. my husband says that...

2002 Mazda 626

-

Maintenance & Repair
I have a Mazda 626 and it is overheating and when I put water into the radiator it won't fill up 1 Answer

I have Mazda 626 and it is overheating when the car is hot I put water into the radiator and it geysers out. When the car is cool and been standing some time it will not fill up, it just keeps runni...

2000 Mazda 626

-

Maintenance & Repair
My 1991 mazda 626 automatic is not selecting any gear i have checked the fluid levels and it is ok.Could there be a fuse blow or something like that since they are electronically controled? 1 Answer

It is not selecting any gear (automatic) i have checked the selector on the gearbox and it is still working.Since they are electronically controlled are there any fuses that could be blown or could th...

1991 Mazda 626 LX

-

Maintenance & Repair
my 91 mazda 626 the engine is revving while driving 2 Answers

while i am driving the rpm's will jump from 1500 to 4000 for just a second does anyone out there have any ideas to fix the problem

1991 Mazda 626 LX Hatchback

-

Maintenance & Repair
i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i want to turn it from red(heat) to blue(cold), but it just swings freely. i think something must be broken. i tried to pull it out, but its hopeless. i don't want to break something else. the reason i'm asking this is because my heater is not working and this little problem might or might not be the reason. thanks for your help. 1 Answer

i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i wa...

2000 Mazda 626 LX

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.