where is the computer module that the keyless door lock code would be taped to it? Thanks.

go to a Merc dealer, prove you own the car, and they will run the VIN and get you the code.

Yes, these lock modules typically have the keycodes long gone after almost 10 years. :)

i just found the lock module on an 01 mercury. it was on the drivers door behind the door panel. the sticker was very readable.

Just pulled my door panel on driver side, black box with codes on it, just under speaker. Easy to read, out of the weather. 2001 mercury GM

It is inside the driver door skin. A 5 digit # on module

or look in the trunk on the passanger side hinge its a sticker plain as day

Pull 4 screws ( 1 visible on left about center, 2 behind rubber inserts on upper door pull, 1 under the switch panel after you unsnap it and lift it out) and then pull the whole panel straight up about 1 inch and then out. The code is on the module in the lower right area, and the sticker is on the lower right area of the module. The code is just above the bar codes.

It is on the hinge! Thank you Fred! You saved me time, Bill

2009 security code for door. Bought used

Wish it had been on the hinge of the 2004. Husband won't look under the door panel. Dealership won't help us get the code, Tom Boland. Guess we just won't have it. Thanks, always good to find a discussion on the net. Bren

Is it possible to add remote control access to a 2006 Grand Marquis that didn't come with it but has power locks and windows?

The code is behind the door panel on the driver side.

The code is in the trunk onse you open it it's on the left top corner if not it's on the left behind the carpet panel where the kill switch for the gas pump is at

You will find the code in the trunk once you open it it's under left top corner if it's not there it will be behind the panel in the trunk as well left side with a kill switch for the gas pump is at

The update on the trunk hinge of a 2000 Mercury and it works great