Kevin Liam answered 7 years ago
Grab a multimeter and check for continuity through the wiring. If you find that there is no voltage coming from the connector then you know it's a faulty wire or switch. If there is voltage, you know that there's an issue inside your new mirror
what about the control module relays in drivers side door- i have an issue when you activate rear drivers side window the drivers window goes down. about the the same time my side mirrors only work in down and in positions
Just replaced he mirror with a used unit. All else is good except there is no response for up and right movements.
2002 Mercury Grand Marquis LS Premium
-
Maintenance & Repair
Replaced the light control module and since then it chimes whenevr the driver's door is opened ...even when the key is not in it and the lights are OFF. Person replacing says this is normal, but I see...
2004 Mercury Grand Marquis GS
-
Maintenance & Repair
I have looked on u-tube but the videos do not have for a 2004 Mercury Grand Marquis LS Ultimate. I've located only two screws. My window regulator has stopped working. Motor is fine.
2004 Mercury Grand Marquis LS Ultimate
-
Maintenance & Repair
Owner's guide says it would be taped to the computer module. I can't find it anywhere and am just curious what the code is. Just in case we needed it. The original owner is pretty old now and suffer...
1999 Mercury Grand Marquis
-
Maintenance & Repair
I own a 2007 Mercury Grand Marquis LS Sedan 4-Door 4.6L 281Cu. In. V8 FLEX SOHC Naturally Aspirated car. The problem i have encountered at first was intermittent then worked while raining then compl...
2007 Mercury Grand Marquis LS Premium
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.