HOW DO YOU RESET COMPUTER

You will have to take this vehicle to the dealership to have the PCM reset or "re-flashed." They will program in the VIN and the proper operation software at that time. To merely reset a Check Engine light, an OBD-II diagnostic scanner will work, but the light will return if the problem is not corrected before doing so.

my nissan navara d40 has a problem on idle speed it goes up nad down.. and no boost at all

Have you tried disconnecting the main battery power cable?

disconnect negative battery terminal and let it sit for about 2 hours

okay first of all, re-setting your pcm will only fix a problem untill it re-learn the problem again, pulling the batt terminals will do the same thing, you need to fix the source of the problem, hook up an obd2 and pull your powertrain codes

I have a Nissan frontier shut off after transmission hi temperature went on. Found transmissin cooling system plugged. Fixed plugged pipes But now my Nissan would not start.nor engine clicks

I have a 2006 Nissan Titan SE I bought several used computers and installed them and the truck is not start up at all but it does turn over it is not getting any fire or receiving an RPM signal if you're reading this and have had this problem please contact me back thank you

I had to change out both camshaft positing sensors crankshaft sensor and that worked for me