1998 Subaru motor swap
I just picked up a 1998 Subaru Forester with a 2.5l.
Knowing it has some issues with the engine I
reluctantly drove it home. Soon after doing some
research I found that the 2.5l was arguably one of
the worst engines Subaru ever made due to the
most prevalent head gasket failures, but I am still
eager to get it going simply for the 4WD as well as
my love for its body style. So the first thing I did
was remove the master air flow and checked the
spark plugs; after removing the plugs I found water
in two of the cylinders and figured that the same
thing must've happened with the gasket and just
wasn't taken care of. Then I took a look at the
thermostat only to find that the center had been
torn out; I'm guessing to accommodate for the
overheating engine. So I replaced the thermostat,
but I really didn't like the chances of putting money
into the engine when the heads were most likely
warped from overheating and not being taken care
of. After coming to this conclusion I picked up
another Subaru for its engine and plan to swap
them. This being my first Subaru engine swap I
would greatly appreciate any questions, comments
and tips that everyone has. As well as a couple
answers I'm sure I'll have along the ride. Thanks
sincerely, John