I have the radio code and entred it correctly but my radion does not work.
After changing the battery in my Audi A4 (1998 model) I cannot get the radio to
work. It shows SAFE and entred the code correctly many times but nothing
happens.
When the word "SAFE" appears on the radio display once you turn on the radio, it means that the radio will only work after you enter the correct code. Press the "SCAN" and "MODE" buttons at the same time and hold them until "1000" appears on the radio display. Then release the buttons as soon as this number appears. https://vwradiocode.eu/
After changing the battery in my Audi A4 (1998 model) I cannot get the radio to work. It shows SAFE and entred the code correctly many times but nothing happens.
1998 Audi A4
-
Maintenance & Repair
I have a 2004 a4 1.8l audi that has a cel, code p0302, it is intermittent, it has 85,000 miles on it, it does it mostly after sitting for a while, So i changed plugs, all coils, swaped coils, swape...
2004 Audi A4 1.8T quattro Sedan AWD
-
Maintenance & Repair
I tried pumping the gas a few times and turning the key and notice a small amount of smoke. I seems to possibly be coming from the passenger side valve cover. I also change my spark plugs before all t...
1997 Audi A4 2.8 quattro Sedan AWD
-
Maintenance & Repair
I've disconnected the battery, replaced it, jump start and nothing is working I have full power on the electronics, horn, and lights and it won't start?
2003 Audi A4 1.8T quattro Sedan AWD
-
Maintenance & Repair
It the part where the oil temp switch srews into it and it is almost to the bottom of the engine
1998 Audi A4 1.8T quattro Sedan AWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.