My heat cage dint work anymore. So I replaced a new sensor but still doesn't give me a reading what can be the problem

My heat cage dint work anymore. So I replaced a new sensor but still doesn't give me a reading what can be the problem 4 Answers

I have a 2000 Audi A4 Quattro 1.8 turbo an it still won't drive after changing the transmission trying to see if someone can help me figure this problem out 1 Answer

One day I pulled up in the driveway and I tried to reverse and it would go backwards for about ten feet then slip out of gear then not too much longer following that couple days later it wasn't going ...

I took My A-4 (2006, 145k miles) in for a routine oil change. After I got it back the Oil Pressure Light and warning sound kept coming on consistently. The sensor was replaced but still comes on. 2 Answers

Can't get the oil pressure indicator to go off or stop sounding. Tried new sensor and upping the oil viscosity. After that it didn't come on as much but it seems to at low speeds or intermittently. ...

hi again, thks for the j217 fault.. is was a wire breakage.. Now i have a new problem, i replaced the turbo , timimg chain .the gents at audi checked every thing on this car and they cant find out why i n not getting power. they checked the timming ,fuel pressure, troth body,and all is correct... im so confused plse advise me on this tks Kevin 1 Answer

hi again, thks for the j217 fault.. is was a wire breakage.. Now i have a new problem, i replaced the turbo , timimg chain .the gents at audi checked every thing on this car and they cant find out ...

my turn signals do not work; I've replaced the fuse...still no luck. The hazard blinkers work. What is the problem 2 Answers

i've changed the fuse for turn signals....still does not work