I have a 57 chevy with a 20K 350 turbo motor and transmission. Car runs great but on occasion when I turn the motor off, a LOUD popping noise comes out of the rear. Not a backfire thru the pipes, it sounds like metal on metal. Any ideas?

I have a 57 chevy with a 20K 350 turbo motor and transmission. Car runs great but on occasion when I turn the motor off, a LOUD popping noise comes out of the rear. Not a backfire thru the pipes, it sounds like metal on metal. Any ideas? 1 Answer

What is causing the noise when I hit a bump? 1 Answer

I hear a terrible noise when going over bumps. My 62 bel air sounds like the undercarriage is falling off when I go over a bump. Nothing under the car is loose. Engine and tranny overhauled. What is ...

I have a 1964 Chevy Belair 6l . I was driving normally and suddenly the car cut out . I changed the ignition switch and starter . Won't turn over from the ignition but will direct from starter 4 Answers

Car was driving fine then just cut out. No power seems to going to ignition swich replaced it and nothing. I checked the fuses and battery is new. Battery cables look good , starter is new , batte...

1972 with a 350-2bbl, does anyone know how hard it would be for me to remove my exhaust manifold and put on a my new headers? Or if there are any potential problems I should know of. Thankz 3 Answers

Looking to Do a full exhaust, trying to save some $ by doing it myself.

i have a 1956 4door hardtop belaire.i just bought.my dashboard does not light up.i have tried everything and i noticed there is no fuse.could this be the problem.what kind of fuse do i get. 4 Answers

i also need a 1956 manual for the car,this is all new to me,i can use all the help i can get.