what is the rim bolt pattern on a 78 landau?
Asked by erik6061 May 28, 2008 at 03:22 PM about the 1978 Chevrolet Monte Carlo
Question type: Car Customization
I found a pair of rims off a 78 monte carlo landau that i want to put on my 94 Trans Am ( 5x120.7mm). I want to know if they will fit before i buy them as they have to be shipped from another state.
5 Answers
Its the same as a camaro,S10,etc I think.
littlehorn answered 16 years ago
www.discountedwheelwarehouse.com has a bolt pattern interchange guide that will tell you.
They should fit as long as the bolt hole and backspaceing are the same!
check the backspacing of the rim. i tried a 17 in. trans am rim on my '79 monte carlo and it did not clear the upper control arm. 4.5 in. of backspacing is a good start point. i got 17 in. rims on the rear of mine w/ 5 in. backspacing and 16 in. on ffrom w/ 4 in. of backspacing. its a safe start.