I have a 78 corvette with the independent steering. If I put the car on jack stands and in gear the back wheels spen very little. is this normal
While on jack stands the back wheels spin very little when its in gear
sixfootsix_car_guy answered 7 years ago
Possible the wheel bearings. But when its in gear, there should be some tension in the wheel rotation. Best of luck!
While on jack stands the back wheels spin very little when its in gear
1978 Chevrolet Corvette
-
Maintenance & Repair
The car has 79,000 miles and is in great shape. The car was a one owner and driven most of the year in southern Ohio. Except for the heater fan making a little noise and the brakes needing changed thi...
2000 Chevrolet Corvette Coupe RWD
-
Maintenance & Repair
1966 Corvette/Ragtop Q: I replaced my front tires and wheels with standard sizes. I noticed the front tires have different clearance in the fender well. The left side is very close and rubs when I ...
1966 Chevrolet Corvette Sting Ray Convertible RWD
-
Maintenance & Repair
i have new lock and new latch that was installed on a 75 corvette when i put the pannel on i closed the door and now the door will not open so what are my options to get the door opened thank you mr...
1975 Chevrolet Corvette Coupe
-
Maintenance & Repair
hello sir, I have a 1981 corvette. It is all original with about 44k miles on it. I had it stored for about 2 years. I took it to the dealership for an oil change and I heard a knocking in the moto...
1981 Chevrolet Corvette
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.