I am going to put a weind dual plane intake man. on my 1981 6.6 400., also will go with a edelbrock carb. to match. Oh, and manifold has no egr port. All emission stuff is hooked up and still works now. Is there any thing special with any vacuum lines or anything else i need to know when i do install manifold and carb.

I am going to put a weind dual plane intake man. on my 1981 6.6 400., also will go with a edelbrock carb. to match. Oh, and manifold has no egr port. All emission stuff is hooked up and still works now. Is there any thing special with any vacuum lines or anything else i need to know when i do install manifold and carb. 1 Answer

I have a 78 ford 400ci with a 4 speed standard tranny and i am trying to convert it to a 5-speed tranny but am having trouble finding a bell housing that will bolt up to my block any sugestions 1 Answer

I was told that a zf5 speed standard tranny out of an 88 ford 351ci would bolt up but the bell housing is not even close to the stock bell housing would a zf5 tranny out of a 460ci bolt up?

i have a 92 f 250 that has a 460 that runs mostly on propane but sometimes on gas. is it possible for me to instal a super chip or hyperteck programmer? 3 Answers

engine has 335000 kilometers on it but runs excellent . it has a new tranny with shift kit so i not worried about that. any input would be great

I have a 89 Ford F250 7.3 idi with an aftermarket turbo and a c6 3 speed automatic, can i take the transfer case and front four wheel drive axle from a 76 For F250 High Boy and put it on my 89? 4 Answers

I will probably need a new front drive shaft be cause my truck may be longer. But will the suspension be compatible on my frame?

my 460ci f 250..any tips i know i got a deal 1 Answer

i have a 94 f 250 i bought for 3000bucks and it has now 40000miles. any tips