Ford Ranger window sweep replacement
Asked by jpepe3691 Oct 10, 2011 at 04:18 PM about the 1988 Ford Ranger
Question type: Maintenance & Repair
How do I replace the inner and outer door window sweeps and the door seals? Water is going down inside the door, and out the seep holes, and pooling over the worn bottom door seal, and then onto the floorboard
5 Answers
they just pull off,new ones snap right on.what condition is the door rubber in.
I don't have the new sweeps in my hands yet. I thought I had to take the door panel off to guide the clips in place? It's GREAT that I can just pull the new ones out and snap new ones in. Obviously I'm a noobie doing this kind of repair. The door seal on the bottom, next to the aluminum step is SHOT. Its actually open with holes.
I don't have the new sweeps in my hands yet. I thought I had to take the door panel off to guide the clips in place? It's GREAT that I can just pull the new ones out and snap new ones in. Obviously I'm a noobie doing this kind of repair. The door seal on the bottom, next to the aluminum step is SHOT. Its actually open with holes.
its easy,just pull off put hew in place,can do both sides in 10 min.