If this only happens with the drivers door master switch then it could be the switch, door wiring inside the tunnel between door a the body. But if all the switches act this way then you could have BCM issues.
beatupchevy answered 8 months ago
You really need a multi meter to see what has power/ground and what don't . I don't see that happening so if you want check the wires in the drivers door jamb boot , I'll bet one or two are broken
windows and door locks not working
2002 Buick Park Avenue
-
Maintenance & Repair
I have a 1999 Buick Park Avenue the doors don't lock or unlock you have to use the key and also the windows don't go up or down. What had happen is the Anti theft was going off and we could not get it...
1999 Buick Park Avenue FWD
-
Maintenance & Repair
I purchased this 1996 Buick Park Avenue recently for my son. It has a few little issues that I haven't been able to figure out. The interior lights (dome, curtesy,etc..) do not have power to them...
1996 Buick Park Avenue Ultra FWD
-
Maintenance & Repair
Originally the windows stopped working so I replaced th fuses
1999 Buick Park Avenue Ultra FWD
-
Maintenance & Repair
1998 Buick Park avenue 233,000 miles. Automatic door locks, radio, electric seat on drivers side and interior trunk release stopped working. All fuses have been checked and all are fine. What could...
1998 Buick Park Avenue
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.