01 chryler town country , crank no start location of 2 cam sensors

Have you checked for fuel and spark? Once you know you have fuel then concentrate on spark. Have you pulled the ODB codes?

I only say this because i changed my cam sensors and it didn't help at all. That said....the cam sensors have to be located near the cams...usually at one end or the other and mounted on the valve covers. So just look on the valve covers for anything with electrical wires connected to it. You probably have VVT cam pulsar solenoids at one end (front of engine) and cam sensors at opposite end. A little web searching could probably find your answer (with pictures) but a little common sense should also work.

Just to be perfectly clear, since the front of the engine is now relative with all of these transverse engines, the front of the engine in this context refers to the end with the serpentine belt, alternator, power steering pump, water pump, and air conditioner compressor. That should be the left side of the engine compartment as you look in on the engine from the front of the car. Want to hear something funny? The right and the left side of the engine gets even crazier. But lets not go into that now.... ha ha ha ha