Automatic Truck is in permanent neutral even in park won't shift
Asked by jhill4 May 13, 2012 at 06:43 PM about the 2002 Dodge RAM 1500
Question type: Maintenance & Repair
Drove truck to work placed in park, got out and it started to roll away. (Got in stopped it using brake.) Started truck put it in reverse engine just reved. Placed in drive engine just reved. Placed in park rolled again put emergency brake on.
9 Answers
This is semi- typical with dodge pickups. My rule of thumb is if you have a dodge pick up with over 120k miles on it you are going to need a tranny rebuild. most of the time they just loose reverse for no reason. So you will be in need of a rebuild. Expect to pay around 1250 for a complete rebuild. I would call the local salvage yards and see if they can help you out with a low mile tranny out of a crashed pickup. that will run you about half the rebuild cost.
Key clue is no park. Check your shifter cable. I'll bet its broken. Probably hit neutral on the way to park and broke then. Otherwise would be stuck in gear and wouldn't start due to neutral safety switch. Good Luck!
well chris your rule of thumb is idiotic, torqueflite makes fantastic transmissions, jhill, your linkage is broken somewhere, or you have a broken bushing/connection
My rule of thumb is not idiotic. i say this because i have rebuilt and replaced many dodge transmissions. Chrysler is idiotic for using the same transmission in every truck they make.. whether you got a 6 cylinder gas to a cummis you are getting the same tranny.
Chris, normally I refrain from involvement in pissing contests but your statement above is simply false. Yes, the basic design is similar but even in the 904/727 days there were and are differences in size, clutches, load capacities, converter types and even gear ratios. Here is but one bit if info and there's lots more out there. http://www.allpar.com/model/ram/dodge/1994-transmissions.html Now, how about we simply solve jhil4's problem here and move the opinions to another thread. Good Luck!
How can I put my truck into drive when the shifter is broken?just want to bring it to the shop.can text answer to 705 220 2219 thank you.
markcockrum answered 10 years ago
I change the neutral safety switch on my dodge ram 1500 01 model now it won't go in drive it will go in reverse and neutral but not drive
I JUST REPLACED THE REAR END IN MY 96 MUSTANG GT AND IT WONT CATCH IN PARK OR REVERSE BUT DOES IN DRIVE,,, ANYONE HAVE A CLUE Y???
Hi I've got a 92 GMC vandura and although park works all other gears r like its stuck in neutral. I lost d a few miles ago but had everything else all of a sudden it just completely lost drive and I've changed the fluid but it still won't give me any gears! I'm stuck 360 miles from home with a disabled old man , an 8 year old little girl , a dog, a mother and a wife gear selected is by rod and is turning on outside of box! Is the a safety selenoid or switch I can fix or bypass ! Please someone help
