replaced sending unit on coolant guage still dosn't work
1 Answer
bandit31so answered 9 years ago
could be in your wiring or the gauge itself. the thing i would do is get an aftermarket one that doesn't rely on wires.
bandit31so answered 9 years ago
could be in your wiring or the gauge itself. the thing i would do is get an aftermarket one that doesn't rely on wires.
1997 Dodge RAM 1500
-
Maintenance & Repair
Cruise control on at 60 mph on flat level 4-lane. Engine died. Starts and immediately dies. Fuel pump pressurizes to 58 psi. Crankshaft position sensor connector dirty with oil & dust apparently com...
2004 Dodge RAM 1500 ST LB RWD
-
Maintenance & Repair
My 2005 Dodge Ram 4.7 is having trouble starting, it usually takes 3 attemps until it turns over. I suspected that it may be the check valve on the sending unit but I can find the part in online aut...
2005 Dodge RAM 1500 SLT Quad Cab RWD
-
Maintenance & Repair
My 08 Dodge 5.7 Hemi has and issue with the oil pressure dropping at highway speeds, when you slow down it seems to go back. Stopped checked oil it is fine and I am thinking it must be the sending uni...
2008 Dodge RAM 1500 ST Quad Cab LB RWD
-
Maintenance & Repair
starter bolt broke replaced starter turns over but not starting it ran good before starter jammed
2009 Dodge RAM 1500
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.