When I was changing my license plate lights one of the wires touch the metal bumper and now my dashboard lights don't turn on I have checked the fuses and light bulbs and still nothing mysignal lights

When I was changing my license plate lights one of the wires touch the metal bumper and now my dashboard lights don't turn on I have checked the fuses and light bulbs and still nothing mysignal lights 2 Answers

Why is my lights and locks isn't working unless i turn the truck on?? 4 Answers

I have a 2004 dodge ram.... I put a radio in it now my lights and locks isn't working unless i turn the truck on....

my 2001 dodge ram 1500 battery died so i changed it and now it wont turn over and the hazard lights flash when the battery is contected there is a red light on the dash located on the left of the stee 1 Answer

put a new battery in my truck and now it wont start and the hazard lights wont stop flashing there is a red light on the dash board located on the left side on the steering wheel

I had a low beam out on my 97 dodge ramm pickup so I drove with hi-beam the whole time. Last night all lights were out and now no low or hi beam work, blinkers and rear lights work....i replace bulbs 1 Answer

after driving with only hi beam (since one of my low beam was out). I came out to find that now no headlights work at all. My blickers work and all my rear lights work. I checked the fuses and all we...

I have got a problem with my fog lights not coming on , checked the 15 amp fuse in the relay box underneath the hood and it was good, need to know how to go about fixing the problem 1 Answer

My fog lights that are factory installed that i supposed came with the truck are not coming on at all, about a couple of months ago i replaced the driver's side fog light bulb and about a year before ...