No signal to coil pack
I got 2006 gmc 4.3 getting power at everything. ..
but no signal at everything need help
Asked by Caseysautomotive Jul 14, 2016 at 09:01 AM about the 2006 GMC Sierra 1500
Question type: Maintenance & Repair
I got 2006 gmc 4.3 getting power at everything. ..
but no signal at everything need help
I got 2006 gmc 4.3 getting power at everything. .. but no signal at everything need help
2006 GMC Sierra 1500
-
Maintenance & Repair
I have replaced a the circuits that connect the bulbs, also replaced the bulbs, replaced the fuses and tested the fuses. I have no idea what the problem could be.
1998 GMC Sierra 1500 K1500 SLT 4WD Standard Cab SB
-
Maintenance & Repair
So here's what it did. Started up fine then I drove 4miles and i went to give it gas and I had no power then it started chugging like it wasn't getting gas or it had a misfire. I pulled over put it...
2000 GMC Sierra 1500 SLT Extended Cab SB
-
Maintenance & Repair
Before I changed my break light switch I would here a click when I would barely press on the break and the break lights would work until I pushed them all the way down to stop now that I changed ...
1998 GMC Sierra 1500
-
Maintenance & Repair
no spark replaced ignition coil, module, and crankshaft sensor fuses are all good still nothing
1998 GMC Sierra 1500 K1500 SL 4WD Standard Cab LB
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.