front wheel bearings
4 Answers
PeteandKatie answered 16 years ago
the bearing on the front is a hub assembly. there are 3 bolts that fasten it. also the axle nut must be removed. can be quite a pain to do without the right tools. hub assembly is the part that the wheel bolts to
their are two different types - the 2WD version looks like the picture i've attached (from GM manual)
5 people found this helpful.
the 4wd version looks like this picture (it's number 6) and includes the ABS wheel speed sensor. This is also from the GM manual
5 people found this helpful.
and as i recall the 3 bolts are either 9/16 or 15mm.. maybe even an 18mm, cant remember, havent done one in a while
1 people found this helpful.