2007 spyder-passenger window won't go up or down. So I was thinking fuse, but if I put the top down the window did go down. Am I on the right path or do you think it is wiring?
15 Answers
Check the fuse first but it could be wiring or a bad window switch. Does the window work at all from either driver or passenger switch?
No-not from either switch. It worked the single time putting the window down when I put the top down and the windows automatically go down. I will get a 7.5 amp switch tomorrow and give it a try.
The passenger switch feeds off of the drivers side master switch. In some vehicles if the drivers switch for the passenger window is bad the passenger side switch won't work either. Good luck.
I'll post tomorrow what happens with the new fuse. Thanks.
Well-it's not the fuse. So I have the door panel off and how do you check the window drive motor?
I really don't think its the motor because it went down with the top. You will need a test light or probe to check the motor and switches.
I think it is the switch-passenger-ordering one to try. Thanks for the help.
Try disconnecting the negative battery cable for 30 mins. These cars get weird glitches like that. Should fix the prob:)
Animefreak 1983- They wrote: "Try disconnecting the negative battery cable for 30 mins. These cars get weird glitches like that. Should fix the prob:)" I tried this and couldn't get the switch today, but sadly, it didn't work. Thanks for the thought.
Fastforker answered 9 years ago
there could be a switch in the circuit that opens the windows when the top is down. No one has stated the obvious but look at a schematic.
HALEYANDNATHAN12613 answered 8 years ago
My car is doing the same. I replaced the window assembly and motor Still nothing even tho my other one worked.
HALEYANDNATHAN12613 answered 8 years ago
It rolls down then I hook it to the battery. But it's like it's getting no power to switch
I just fixed this tonight- if your passenger side window won't go down check to see if the driver side switch is illuminated. If the LED is out there is a black diode on the board of the switch that can go bad, I just replaced it with a 1n4148 and i'm back in business.
I had the same problem. After a week of investigating, it turned out to be an issue with the window lock. Basically, in the drivers side window switch, you need to open it up and find the copper piece that makes a connection when the window lock is off. It gets bent out of shape and doesn't make a connection anymore. I bent it back and now I'm excellent
