my bake lights wont work
Asked by charliebarzdis Aug 12, 2011 at 10:03 PM about the 1988 Pontiac Bonneville
Question type: Maintenance & Repair
my brake lights dont work the fuse is good the switch seems to be working the bulbs are good what ealse could it be
4 Answers
if you sure the BLswitch & bulbs are working,this is a common problem on GM vehicles,remove tail light assembly,unplug wireing connector,take out plastic backing where you gain access to bulbs,replace that part,a used one at a salvage yard is usually good,what happends is moisture builds up in theses and rust the conectiors or they burn out over time.
charliebarzdis answered 13 years ago
all the other lights work blikers and running lights there is not a seaperate socket for the brake lights
OK ,if all other lights are working,I would say the break light switch is bad or the bulbs are blown,they have 2 wires inside them,break & turn signal lights work off same bulb.
Ok i checked my right tail light its not on but my left. Tail is y is im not getting any right tail light
