03 L 300 V6 Have power to relays and fuses, but do not have power at Fuel Pump

the relay may click and still not be good. on the side of the relay is a diagram. one looks like and open gate and one will have a winding around it. the one with the open gate is the one u should be concerned with, jump across those two terminals. this will be applying power directly to the pump. listen for the pump working, then if it is, replace the relay. be careful when jumping relays, you will be dealing with full 12v, so make sure u have the correct pins before you jump anything. good luck!!!

Check your crankshaft position sensor