Please help , a person worked on my 2007 bantam and now the car does not whant to pickup revs once it has stopped for any reason what so ever , I replace the tps sensor

Asked by GuruDTXDC Aug 16, 2017 at 12:44 PM about the Ford Bantam

Question type: Maintenance & Repair

My 2007 bantam seems to be getting to much fuel , or to little . I have replaced the tps sensor , the car is fuel injection and this could mean any thing could be faulty .

16,935

Guru97FK8 answered 7 years ago

What was done to the vehicle ? Check the fuel line pressure at the fuel rail. Check for any damaged feed or fuel return pipes. If the engine is not reving, check that the correct spark plugs were fitted. Best use Motorcraft Spark plugs through the Ford Pats Department. NGK Plugs will cause surging and no power from 3000RPM. Was the engine washed when it was hot, in this case it could have cracked the coil pack. Check the basics first.

Mark helpful

Your Answer:

Please help , a person worked on my 2007 bantam and now the car does not whant to pickup revs once it has stopped for any reason what so ever , I replace the tps sensor 1 Answer

My 2007 bantam seems to be getting to much fuel , or to little . I have replaced the tps sensor , the car is fuel injection and this could mean any thing could be faulty .

Ford Bantam

-

Maintenance & Repair
Help please, my ford bantam heater just starts while using the ac. The aircon is pouring water in to the car on the pasanger side underneath the dashboard!. And if n switch off the car it starts overheating! So I think that the cooling fan is also not working right! What can the problem be? 9 Answers

The ac only drips water when its on though!

Ford Bantam

-

Maintenance & Repair
Do i need to replace the oil pump on my bantam 3 Answers

Ford Bantam 1.3 Rocam 2008, 170 000kms: I had a temporary drop in oil pressure followed by quite loud ticking coming from the cylinder head (I stopped the car immediately). I gave the car a little r...

Ford Bantam

-

Maintenance & Repair
the revs on my bantam 1.6i XLT is hunting especially when the engine is cold. thi sproblem started on Saturday? help please before i take it to the dealers. by the way i have done 392000km with it. 2 Answers

i have done 392000km with my ford bantam 1.6i XLT but recently the revs started hunting between 750 and 1500rpm. it looks like the engine is taking up strain as indicated by the diming of the interior...

Ford Bantam

-

Maintenance & Repair
please help - i wash my ford bantam 2006 model car in the bonnat and its doe wanna start any more all its does just giving a sound at petrol tank!!! 1 Answer

i wash my car in the bonnet but now the egine doesnt wanna start any more its not even giving the starting sound all it does when i switch on the egine its just a sound at petrol tank where may be t...

Ford Bantam

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.