84 Dodge d150 cranks but want start. Checked full pump full filter. Changed coil distributor and rotary button. Still nothing. Help please
5 Answers
beatupchevy answered 6 years ago
spark and fuel pressure need to be tested before replaced , does it have carburetor or TBI , what about the ballast resistor does it have one of them ,?
Yes it has carburetor. I am getting gas and the spark is good. I don't know what the ballast resistor is or where it is. I know there is a couple of small box's on driver side fender. And a ignition module on fire wall. I thought it might be ignition module but don't know how to check it
beatupchevy answered 6 years ago
if you're getting spark at the plugs then it's not the module , if you pour some gas in the carb, does it start up ? look down the carb when it's off and open the throttle there should be a squirt of gas coming from the inner side of the throttle , only thing left is compression , fuel + spark + compression = vroom
Changed spark plug and wires. Still same changed ignegtion MOD it fired up