We have a 1999 dodge durango and it will not start. We have changed the crank sensor, coil, distributor, and have tried to reset the alarm and the pcm and nothing works. Please help!!!!!!!

We have a 1999 dodge durango and it will not start. We have changed the crank sensor, coil, distributor, and have tried to reset the alarm and the pcm and nothing works. Please help!!!!!!! 2 Answers

We have a 1999 dodge durango and it will not start. We have changed the crank sensor, coil, distributor, and have tried to reset the alarm and the pcm and nothing works. Please help!!!!!!!

I have a '98 Dodge Durango that sounds like it is running out of gas. It spits and sputters and dies. Pushing in the gas pedal to rev the engine does not help. Durango eventually dies. I have had the fuel pump replaced and am leaning now towards maybe the throttle sensor or even the computer module. Any thoughts? 5 Answers

I have a '98 Dodge Durango that sounds like it is running out of gas. It spits and sputters and dies. Pushing in the gas pedal to rev the engine does not help. Durango eventually dies. I have had th...

I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put it in ( N, R, D, 1, 2 ) My first guess is the transmission went out, but could there be a sensor or other cause for this. When I accelerate, I hear the engine, but still have no movement in any gear. 8 Answers

I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put ...

I have a 98 Dodge Durango. I've change the cold pack crankshaft sensor it has fire turns over tries to crank but just for not. someone please help me this is the only car me and my wife have 1 Answer

I have an 02 dodge Durango and I am not getting any power to the fuel pump I am getting power at the relay and the fuse is good I have cleaned all the ground connections and nothing! 5 Answers

I did reset the system and the pump kicked on once I also have cleaned most of the electrical plugs