2004 escape, both headlights went out at the same time. high break works. the high beam indicator light comes on when it is low beam position but no low beam outside. have to put high beams on.

2004 escape, both headlights went out at the same time. high break works. the high beam indicator light comes on when it is low beam position but no low beam outside. have to put high beams on. 1 Answer

High beams won't work and when I pull the switch to put them on my low beam headlights go off 3 Answers

2012 ford escape I hit a deer and had to replace my passenger bulb,when I replaced the bulb my lights will go off if I engage the high beams but low beams work fine. I also replaced the whole head...

high beam indicator 22 Answers

Can someone please tell me if the entire dash has to be replaced just because the high beam indicator is out? please I need help. thanks

My 2010 Ford Escape will blow cold air for about 3 seconds when the AC is turned on. I checked the compressor and the clutch will engage for those first couple seconds and then stop completely. I thought it might be low on freon, but when I went to check the low pressure, I got a low pressure reading of 100, which is way too high. My guess is the relay is done or maybe the compressor. Any advice? 1 Answer

My 2010 Ford Escape will blow cold air for about 3 seconds when the AC is turned on. I checked the compressor and the clutch will engage for those first couple seconds and then stop completely. I ...

2006 transmission fluids levels are both high and low at the same time 2 Answers

My 06 escape stalled and is leaking translation fluid . When checked the fluid is high and when idling was low. The transmission has slipped only once . There are no engine lights on