High beams won't work and when I pull the switch to put them on my low beam headlights go off

High beams won't work and when I pull the switch to put them on my low beam headlights go off 3 Answers

2012 ford escape I hit a deer and had to replace my passenger bulb,when I replaced the bulb my lights will go off if I engage the high beams but low beams work fine. I also replaced the whole head...

2004 escape, both headlights went out at the same time. high break works. the high beam indicator light comes on when it is low beam position but no low beam outside. have to put high beams on. 1 Answer

Low beam headlights do not work 3 Answers

The low beams on my 2004 Ford Escape do not work. The high beams do work but the high beam indicator on the dash doesn't. I have already tried replacing the whole switch that's on the steering colum...

i changed the oil in my 2013 ford escape and now when i put it in gear it wont go 3 Answers

i changed the oil in my 2013 ford escape and now when i put it in gear it wont go

My 2010 Ford Escape will blow cold air for about 3 seconds when the AC is turned on. I checked the compressor and the clutch will engage for those first couple seconds and then stop completely. I thought it might be low on freon, but when I went to check the low pressure, I got a low pressure reading of 100, which is way too high. My guess is the relay is done or maybe the compressor. Any advice? 1 Answer

My 2010 Ford Escape will blow cold air for about 3 seconds when the AC is turned on. I checked the compressor and the clutch will engage for those first couple seconds and then stop completely. I ...