Security issue or something else?

Don't know if you solved your problem I had a 1995 cherokee and when the battery died it must reset security. The lights would flash would turn over but not start. Take ignition key unlock drivers door turn clockwise than counterclockwise than try to start that worked or me.

I have a 95 jeep grand Cherokee larado sraght 6 it dies after runing to about 30min then lights flash and security comes on I lock then unlock the door lights and security stop it won't start tell about 2hrs later any awsers

mine just did this the other day...put window down on deiverside(so you can put your arm in to start) or have someone in it... take ur key to driver door and to the lock unlock if don't work try passenger side if that don't work try hatch<<<< I had to reset the alarm system though my hatch all doors and hood need to be closed when ur lights r not flshing its down u hould start it them but don't open anydoors till u start it resets the system. dealer ship told me that over the phone and it worked

my battery was dead so I had to keep jumper cables on it shut the hood<<

Glad to know why my 97 Grand Cherokee Ltd took the jump but wouldn't stay running and alarm was going off. Two things though: 1) I just put a new battery in it recently but haven't been driving it and left the alarm on. 2) The door key locks were removed a long time ago so since it was locked with fob I used tailgate key to enter and unlock doors from inside. How now to disarm the security system? Somehow using tailgate key?

My cumputer light want cut on in my 1997 grand jeep Cherokee what is the problem

Locking and unlocking the tailgate should reset the security system.

I have a 95 ZJ 4.0L with an oem passive security system. I was helping a Friend work on his Jeep for several hours with the rear hatch open for several hours which allows the interior lights to stay on. At the end of the day I went to start the ZJ to leave and there was some sound from what sounded like the solenoid but the starter nor engine would turn over. The head and taillights began flashing at the same time where the security indicator remained on steady. So I tried resetting the security but the same thing occurred when trying to start. So my friend tried to give me a jump with the security reset but the same thing occurred. What this security system FSM refers to this condition as, is power up alarm mode. Power up alarm mode. When the battery is disconnected and reconnected the security system enters into a power up alarm mode. - Flashes headlight - Flashes Park and taillights - Prevents the engine from starting. In order to prevent the engine from starting the PCM disables the fuel injectors fuel delivery (pulse). In my case I was eventually able to start the engine by cranking over the engine for ~30 seconds or more until the engine started. I think the probem may have been lack of fuel or fuel pressure as the security system disables the fuel injectors when in power up alarm mode. Then when you go to start the engine (security system not in power up alarm mode) there isn't enough fuel to start the engine quickly. I'm only guessing here as I'm not certain what happened. After the ZJ 4.0L engine started it ran and started again just fine. Anyway something caused the security system to think that the battery had been disconnected. Either low battery or a loose or corroded connection?

I have a 2002 jeep grand Cherokee Laredo it sat for awhile you turn the key on the key symbol flashes it starts then shuts off right after I have tried all the lock tricks key fob tricks you name it still wont work

1994 jeep grand Cherokee limited after disconnecting the battery and reconnecting use the key to lock/unlock doors and hatch. this should reset the security system.

A young man showed me this simple method to disable your security system from preventing you from starting your Jeep. It actually makes sense since it trains the anti theft system to ignore. You need two keys. Place one key in the passenger door and twist clockwise position. Leave that key in the door and then use the other key to start your vehicle. While the vehicle is running, remove the passenger door key. I wished I knew this before spending money for a new ECM!