start new search 2017 ram
will not start turn switch on and gauges work but when i turn key fob to start
it will not turn over engine and the gauges stop working
Sounds like a massive voltage drop, first thing to check is of course the battery's ability to handle the high starter load, if the battery passes the load tests, make sure the battery terminals are shiny clean and then you will need to run voltage drops tests on all the main cables. Also, if you grab any main cable and listen for a crunching sound when you try to bend it then the cable needs replaced as it has internal corrosion.
will not start turn switch on and gauges work but when i turn key fob to start it will not turn over engine and the gauges stop working
Dodge RAM 1500
-
General
How many pounds can a 2017 Ram 1500 SLT tow ?
2007 Dodge RAM 1500 SLT RWD
-
General
I have a 96 ram 1500 5.2. ran fine shut her down and the next day no start. Changed coil, crank sensor, (and was a whole lot of no fun), relays and pcm. no start. when I turn the key on I don't hear...
1996 Dodge RAM 1500 Laramie SLT Club Cab LB RWD
-
General
96 Dodge Ram 1500. No fire. Check engine light comes on for split second and then goes off. Replace coil, ignition, pulled sensors, fuel pump, I have seen others with same issue but no fix solut...
1996 Dodge RAM 1500 ST Club Cab LB RWD
-
General
i have a 2017 dodge ram sport 4x4 hemi i ried to get my ac to come on after the winter an it just blows air thats far from cold even on max air setting is this a problem with thi...
Dodge RAM 1500
-
General
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.