still chugs when i hit 45mph i back off and hold around 40 to 45mph had it up to 55mph before it did it again, someone thought it might be a torque converter problem, not sure

still chugs when i hit 45mph i back off and hold around 40 to 45mph had it up to 55mph before it did it again, someone thought it might be a torque converter problem, not sure 2 Answers

I have a 97 dodge ram 1500 with a 5.9 in it and it want turn over.... it was cranking good then I cut it off and when I got back in to leave it would not do nothing...... every thing still works but 1 Answer

It want turn over... I replaced the starter and igntion switch and still nothing someone please help me

i have a 94 ram 1500 4x4 the speedo dosent work the check engine light comes on when it suppose to shift into overdrive but it dosent, and pretty sure the torque converter is not locking. 2 Answers

i replaced the rear diff speed sensor tried two t case speed sensors idk.. ground wires?? is there another sensor im overlooking? i think its throwing code 37 but im not fully sure i really dont want...

i let my truck sit for 2 months and now i have to jump it to start it when i shut iyt off it will start right back up but if i leave it sit for more than 20 min it wont start until jumped again 2 Answers

I can leave it running for an hour and it still wont start

dodge pickup 1500 1999 chugs when it reaches 45mph rpms drop 2 Answers

driving down the highway at 65mph when trucks tac dropped rpms and started to chug had to lower speed under 45 mph to next exit, it was a cold day 8 degrees wind chill below zero