fuel injection pump CKP sensor does not agree with EMC CKP
truck has no power when first start it lopes, and white smokes
The white smoke depending on how much can indicate possible blown head gasket seals which a majority of the come from lack of oil changes.. Have you changed the oil ? And when your driving and you accelerate do you get a cloud of white smoke behind you?? I'm not sure of that would cause the lose in power but just food for thought
truck has no power when first start it lopes, and white smokes
Dodge RAM 3500
-
Maintenance & Repair
doesnt run at all like it did after the( after market pump) was put on. did the shop forget to hook something back up? is it a possible relay?? i have just dropped a ton of money in the front end with...
2002 Dodge RAM 3500 SLT Plus Quad Cab LB 4WD
-
Maintenance & Repair
Having a problem with blower motor on air and heater, would not start when you first start truck, then about maybe 5 min down the rd it would come on, now it will not come on at all, makes driving dif...
Dodge RAM 3500
-
Maintenance & Repair
Accelerator can be depressed a little way, but seems to be "stuck" on something. Can not even "force" it beyond this point. Engine runs fine but will not give more than about 1,100 rpm. Tried cleani...
1998 Dodge RAM 3500
-
Maintenance & Repair
I'm trying to find if the fuel pump in tank is putting out proper pressure. I'm having problems determining which line to connect my pressure gauge. There is one place on bottom, which I believe i...
2006 Dodge RAM 3500 Laramie Quad Cab LB 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.