You need to replace the part that is broken.
i was trying to avoid replacing the block. I have new bolts new flywheel, new starter, etc. the ear is on the engine block. i want to Know if theres a kit to move to the starter to the bellhousing.
there is a crack and part of the ear is broken off on the rightside bolt of the starter
Chevrolet C/K 1500
-
Maintenance & Repair
my 1998 chevy will not start I just put a starter on there and it was fine the other day now it wont start I really need help
1998 Chevrolet C/K 1500 Silverado Extended Cab LB 4WD
-
Maintenance & Repair
It does the knock when the truck is cold and goes away when its warmed up. I changed the oil from a 5w-30 to a 10w-30 and it went away for a while and now it started back up. The truck almost up to ...
1996 Chevrolet C/K 1500 Cheyenne Extended Cab RWD
-
Maintenance & Repair
I have a 90 Chevy cheyenne 4x4 with a automatic transmission and a 4.3 liter v6 engine. I also have a 89 Chevy that had 350 with a 4 speed manual transmission behind it. I want to put the 4 speed i...
1990 Chevrolet C/K 1500 4WD
-
Maintenance & Repair
I have a 1996 Chevy Silverado C1500 ext with 4.3 v6 and manual transmission... The service engine light came on... Trouble code says problem is bank 3 oxygen sensor... Where is the bank 3 oxygen se...
1996 Chevrolet C/K 1500 Cheyenne 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.