Have Lexus RX300 with AC Heat door stuck problem. AC and Heat works but doors do not change. How can I fix this?
4 Answers
Kind of sounds like the actuator motors or servo motors that change the blend doors or the mode doors(where you want the air to blow) might not work anymore.. Do they make a clicking noise as if they may have stripped their plastic teeth or are in-op entirely? It could be fairly expensive, the servo motors aren't terribly expensive but dis-assembly of the lower passenger side of the dash and glove box area is usually required.
Changed the main servo. Overall cost including labor was $354.
lexusowner13 answered 10 years ago
If you can see the AIR MIX servo to the left of the glove box and just behind the head unit, you can replace yourself. You will need to remove the glove box and use a stubby philips screw driver. Before you do,get under and listen for the servo. Its the servo that is grinding and clicking. Used servo can be found on ebay for $50, new ones are about $175.
24sevnlibrarian answered 6 years ago
Can the servo be tested before replacing to be sure it is the problem?
