what would cause the engine not to idle down for 30 seconds
2 Answers
aztec626bf answered 12 years ago
I think you are right about the vacuum being an issue. Here is a good reference for vacuum trouble shooting.......... You should get between 17-22 in. hg. depending on your elevation above 2000 feet MSL or mean sea level. To perform this test hook vacuum gauge directly to manifold vacuum. 1. Low steady needle usually indicates leaky intake, a leaky vacuum hose, late timing, or incorrect camshaft timing. 2. If reading is 3-8 inches low and fluctuates at that low reading suspect an intake manifold gasket leak at intake port or faulty injector. 3. If the needle has regular drops of about 2-4 in hg. at a steady rate the valves are probably leaking. (Perform a compression check). 4. An irregular drop or down flick of the needle can be caused by a sticking valve or an ignition misfire. 5. A rapid vibration of about four in hg. indicates worn valve guides. 6. Slight fluctuation of one inch or so indicates ignition problems. 7. Large fluctuation perform a compression check. 8. If needle moves slowly through a wide range check for PCV issues. Hope this gives you a good place to start and helps you figure it out.
TheDoc0r10 answered 8 years ago
I don't have an answer and I know this is a old post but I recently bought the car in the pictures and wanted to know more of the cars history before it was sold, If possible. please email me at Michael.armstrong827@gmail.com