Need to replace my distributor, can anyone recommend one as ford no longer supplies the original ?

Need to replace my distributor, can anyone recommend one as ford no longer supplies the original ? 1 Answer

Need to replace thermostat. Which is the correct one 160 , 180 or 195 degrees and what manufacture? 24 Answers

My car is running too hot. I want to change the thermostat first then maybe the water pump or the fan clutch?

how to replace gas line 1 Answer

I own a 1988 Ford Mustang. 5 speed, manual,convertible, 5.0. My car broke down on a highway and I had it towed to my home. At that time, financial issues were a major problem so I left it sitting, w...

i have 1979 ford mustang its all original and the 4cyl still runs its in fair condition can u tell wht it is worthits called a super sport is it a s%5Becial edition can anyone help 4 Answers

i would like to put a 460 cu inch motor in my 1979 mustang and i would like to sell it right now its all orig from motor back in fair condition low miles can i put a 460 in my mustang or can u tell m...

Does anyone know how to work the air controls on a 1966 mustang? I'm sure this is a standard Ford part.I'm not even sure what they're called, fan / air conditioning / force blown air, etc.. My 1966 mustang came with A/C standard. In the dash there are chrome controls for the air. One lever is horizontal and has about 5 notches that it clicks into place. It slides from left to right and back. Have no idea what that does. Directly underneath are three vertical levers.. The first one is labeled HEAT. I can't figure out if it being in the up position is turning the heat on or off. Next to that is TEMP. Next to that is a blank one. All three slide up and down. Does anyone have any idea how these work? I'm trying to get the heat to work and am freezing my a** off, as it seems to be blowing A/C. 6 Answers

Air controls for 1966 Ford Mustang with A/C.