what do i have to do to change the wheel speed sensor and is it my intake manifold that is letting oil leak and making it smoke?

what do i have to do to change the wheel speed sensor and is it my intake manifold that is letting oil leak and making it smoke? 2 Answers

Pls help! My 2000 Monte Carlo 3.4 automatic transmission is making this weird remote control car sound (that's the only way I can describe it), and in addition to that noise it jerks. 7 Answers

Pls help! My 2000 Monte Carlo 3.4 automatic transmission is making this weird remote control car sound (that's the only way I can describe it), and in addition to that noise it jerks. Can someone ...

I have a 2003 Monte Carlo 3.8 V6. Do I need to replace the engine if the head gasket is blown and it has overheated? 5 Answers

I bought a 2003 Monte and was told nothing was wrong with it. I've had it 6 mo. and it started overheating. We replaced the thermostat and flushed the radiator. it ran fine for 2 wks and started ove...

I have a 03 monte carlo that keeps burning a hole through the upper intake where the EGR tube is on lower intake what is causing it to burn 1 Answer

Ever sense the car over heated the first time the car has lost power and runs rough, we have replaced MAP sensor,fuel fillter,had fuel system cleaned,thermostat and still runs bad and burns a hole i...

My monte carlo is a barrel v8. I have a problem, when i start it and it is idling it runs fine but when i go to put it in drive and try to run it it pops at the catylytic converter and it back fires and turns off and then it is hard to turn on. I have changed oil,oil filter,fuel pump, rubber hoses coming from carb, plugs and wires,distrubitor cap and rotor,fuel filter, and rebuilt carberator. I need help timing is adjusted as well. 1 Answer

all has been changed that I think is the problem do you guys think the catalityc converter is bad or a timing issue?