By frozen, I assume you mean engine can't crank/turn over, even by hand? Try pulling the plugs and cranking it over. Pulling the plugs eliminates compression and makes it a lot easier for crank to turn. At least then you'll know what shape bearings in the short block are in.
I have a 1990 Chevy Silverado 4 by 4 with a 5.7 TBI it 's seems to be frozen any ideas
1999 Chevrolet Silverado 1500 4WD
-
Maintenance & Repair
350 tbi 5.7 runs fine oil mixes with coolant, white smoke out exhaust, NO check engine light, but idles and runs fine?
Chevrolet Silverado 1500
-
Maintenance & Repair
About how many hours would it take to rebuild a 350 5.7 tbi
1992 Chevrolet C/K 1500 Stepside RWD
-
Maintenance & Repair
I have a 1989 suburban v2500 with a 5.7 tbi. It ran good when I bought it and I drove it everywhere for about 6 months the only issue with it is that if I drove it for a long time and would stop sh...
1989 Chevrolet Suburban V20 4WD
-
Maintenance & Repair
I have a 5.7 1997 k1500 with auto trans. If I put it manually into 1 or 2 it work work fine but 3 is same as 2, in drive first will work then when it goes to shift to 2 it will act like it goes in...
1999 Chevrolet Silverado 1500 Extended Cab LB 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.
