Asked by Scott Dec 07, 2013 at 12:34 AM about the 1999 Chevrolet Silverado 1500 LS Stepside 4WD
Question type: Maintenance & Repair
I have a 92 chevy 1500 shortbed step side 4x4, it has a gm goodwrench crate motor in it. can I put a enginetech camshaft stage 2 cam and a flat lifter kit in it
I assume your crate motor came with flat top pistons? The valves should not slap the pistons when operating. When putting the engine together, if you know how or get some one that does know how, check the clearance you have in the valves and piston clearance . It should work. You will have to have it tuned to the cam when done, enjoy.
I have a 92 chevy 1500 shortbed step side 4x4, it has a gm goodwrench crate motor in it. can I put a enginetech camshaft stage 2 cam and a flat lifter kit in it
1999 Chevrolet Silverado 1500 LS Stepside 4WD
-
Maintenance & Repair
WHAT CAN I DO TO GET THE KEY TO TURN OVER WITHOUT STICKING AND HAVING TO WIGGLE TO GET IT TO WORK
1999 Chevrolet Silverado 1500
-
Maintenance & Repair
I need to know what may be causing the problem
1999 Chevrolet Silverado 1500
-
Maintenance & Repair
I've replaced the ignition module, distributor, cap, rotor, and the crankshaft sensor. I can't figure out the problem. Could someone please help?!?
2001 Chevrolet Silverado 1500 LS RWD
-
Maintenance & Repair
how to put a valve lifter in a 2011 Chev 1500 truck do you have to remove the head or can you just remove the intake and remove it that way
2011 Chevrolet Silverado 1500 LS Extended Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.